Laser cladding according to DNV JIP 2009-3295 for extended lifetime

MetamaX can offer you laser cladded coatings for extended lifetime with a unique 10 years warranty.

Based on the application we can advise you of  the right coating-material. A wide range of welding materials is available based on Inconel or stellite. After choosing the material we can advise you of the right seal configuration to match with the coating.

The laser cladded layer is a 100% closed layer with a welded bonding to the base material. The automated welding observation system assures that failures are detected and corrective action takes place. The dilution  is less than 1% meaning that the actual layer has the exact properties of the chosen top coating matrix.

The finished layer is complete homogeneous to protect the base material against any corrosive medium. Due to the automated laser welding system the heat effected zone is reduced to a minimum, keeping the original strength to the base material.

The technology is not new. It is a proven system that  is applied for many years in medical and chemical industry. The last years this coating system is applied on many hydraulic applications with proven life time extensions.

After laser welding the layer is machined to the right tolerances and roughness to match your requirements. All products are finally inspected with NDT testing methods and marked with traceable identification. The certificate of conformity states all relevant technical information as tolerances achieved and layer thicknesses.